AI Vision Solutions &
Embedded Systems Engineering
Get a free quote

Custom Carrier Boards for NVIDIA Jetson Platforms

Accelerate Your AI Edge Product Development With Our Custom NVIDIA Jetson Carrier Boards for Jetson Orin, Xavier, and Nano.
ATEH.tech designs custom carrier boards for all NVIDIA Jetson modules — AGX Orin, Orin NX, Xavier NX, TX2, and Nano.
Our boards ensure reliability, scalability, and performance for your embedded vision and AI systems.
From concept to production — we help you bring a product to market faster.
Custom board design for your Jetson SOM
Rapid prototyping and validation in our in-house lab
Full hardware–software integration and testing
Production-ready documentation and support
Custom carrier board for NVIDIA Jetson AGX Orin and Jetson AGX Xavier modules
NvidiaSonyLinuxOpenCV
Full-cycle R&D
In-house laboratory
4.9/5 Ratings
Projects we have completed

Explore our selection of NVIDIA solutions

Orin AGX, Orin Nano Super, Orin NX, Xavier AGX, Xavier NX, TX2, TX2 NX, Nano Board.

NVIDIA Jetson Orin AGX and Jetson Xavier AGX

Jetson AGX Orin — production-ready custom carrier boards.
Custom carrier board for NVIDIA Jetson AGX Orin and Jetson Xavier AGX modules
Interfaces:
• SoM – Orin AGX and Xavier AGX
• 3 x USB 3.1
• 1 x USB 2.0
• 3 x 1G Ethernet
• 3 x MIPI CSI-2
• 1 x HDMI
• 1 x M.2 PCIEx4 for NVMe
• GPIO, SPI, I2C ports
• Power supply DC 19V, 200W
PCB:
• Stackup – 10 layers
• PCB – 1200+ components
• 4300+ pads
• 3800+ vias
Carrier board for Nvidia Jetson AGX Orin and AGX Xavier, bottom side viewCarrier board for Nvidia Jetson AGX Orin and AGX Xavier, top side view

NVIDIA Jetson Orin NX, Orin Nano Super and Xavier NX, TX2, Nano

Jetson Orin NX — production-ready custom carrier boards.
Jetson Orin Nano — for Compact Edge AI Systems.
Interfaces:
• SoM – Orin NX, Xavier NX, TX2, Nano
• 2 x USB type-C
• 1 x USB 2.0
• 1 x 1G Ethernet
• 3 x MIPI CSI-2
• 1 x M.2 SSD NVME (PCIe4 x4)
• 1 x M.2 for Wi-Fi or LTE (PCIe3 x1)
• 1 x HDMI
•  CAN, GPIO, SPI, I2C ports
• Power DC 9V – 24V, 40W
PCB:
• Stackup – 8 layers
• PCB – 1200+ components
• 4300+ pads
• 4500+ vias
We design carrier boards and complete embedded systems for all NVIDIA Jetson modules — optimized for AI, vision, and robotics applications.
Embedded Software

Software Expertise for NVIDIA Jetson

From low-level BSP customization to AI acceleration — ATEH.tech provides full-stack software development and integration for NVIDIA Jetson Orin, Xavier, and Nano platforms.
Embedded software development for NVIDIA Jetson — BSP, drivers, AI optimization
NVIDIA JetPack SDK: system setup, package optimization, and version migration
Linux BSP Customization: kernel configuration, device tree tuning, and boot optimization
Driver Development: MIPI CSI-2 camera sensors, I2C, SPI, GPIO, USB, and Ethernet
Multimedia Stack: GStreamer pipelines, V4L2, Argus API, and DeepStream integration
Edge AI Deployment: model quantization, TensorRT acceleration, and containerization (Docker)
Production Support: image flashing, factory provisioning, and diagnostics scripts
Toolchain: C/C++, Python, CMake, Yocto, CUDA, TensorRT, OpenCV, GStreamer
Our software team has extensive experience in customizing NVIDIA Jetson Linux BSPs, integrating camera sensors (Sony IMX series), and optimizing AI workloads for Jetson Orin, Xavier, and Nano modules. We ensure seamless performance from prototype to mass production.
Do you need customized Jetson software or camera integration?
Get in touch with our engineers

Explore Our NVIDIA Jetson-Based Solutions

From Jetson carrier boards to full AI vision systems — we help companies accelerate product development and go to market faster.
Jetson Orin AGX carrier board for edge AI server applications
Edge AI Server
High-performance carrier board for NVIDIA Jetson Orin AGX and Xavier AGX — ideal for edge AI and data processing
AI surveillance camera with dual lenses detecting people
AI Vision Camera
Dual-sensor platform based on Jetson Orin NX — perfect for embedded vision and smart camera systems
Jetson Xavier NX carrier board for autonomous robots
Autonomous Robotics
Jetson Xavier NX-powered controller for industrial robots, featuring CAN, PCIe, and multi-sensor interfaces

Whether you need an edge AI server, a vision system, or a robotics controller —
ATEH.tech provides full-cycle design, from schematics and PCB layout to embedded software and production support.

Here are some questions we are often asked

If your question is not here, please contact us.
Ask a question
What exactly does ATEH.tech do?
ATEH.tech is a custom Nvidia Jetson carrier board development company that provides customized solutions to help R&D teams accelerate their development process and create unique solutions in the field of computer vision.
What types of Nvidia Jetson carrier board solutions are available from ATEH.tech?
ATEH.tech offers a range of custom Nvidia Jetson Carrier boards to meet specific customer needs. Our services include carrier board design, prototyping, testing, and manufacturing.
What is the process for developing a custom Nvidia Jetson carrier board with ATEH.tech?
Our process involves working closely with the client to understand their needs and requirements.
What are some examples of previous projects that Ateh has worked on?
Ateh has worked on a variety of projects in the field of computer vision technology. 

Some examples include developing custom Nvidia Jetson carrier boards for autonomous vehicles, security cameras, and robotics applications.
What is the expected turnaround time?
Completion times depend on the project's complexity. However, we strive to deliver solutions as quickly as possible without sacrificing quality.

Please contact us to find out the approximate time frame for your project.
Does ATEH.tech provide ongoing support and maintenance for its custom Nvidia Jetson carrier boards?
Yes, we provide ongoing support and maintenance for our custom Nvidia Jetson carrier boards to ensure they continue to perform at the highest level.
What makes ATEH.tech different from other PCB design companies?
ATEH.tech is known for its customer-focused approach, commitment to innovation, and high-quality, customized solutions. We also have a team of highly skilled and experienced professionals dedicated to delivering exceptional results.
What is the cost of developing a custom Nvidia Jetson carrier board with ATEH.tech?
The cost of a custom carrier board solution depends on the complexity of the project. 

We work with our customers to provide a transparent and competitive pricing structure that reflects the scope of work involved.

What We Design

We create reliable, production-ready electronics hardware for AI, embedded, industrial, and IoT applications — from compact controllers to high-performance computing AI modules and servers.

Specialize in:

SoC, CPU, FPGA & Carrier Boards — high-speed designs with DDR, PCIe, MIPI CSI-2, USB 3.0, Ethernet.
AI Vision Boards — camera and sensor integration, ISP channels, and power management for machine vision systems.
Industrial Controllers & IoT Devices — modular designs with wide temperature range, PoE, and CAN interfaces.
Power and Battery Boards — DC/DC converters, battery management, protection, and charging circuits.
Communication Modules — Wi-Fi, Bluetooth, Ethernet, RS-485, and custom radio links.
Custom CPU and SoC boards for high-performance embedded systems
CPU and SoC boards
FPGA system board for hardware acceleration and signal processing applications
FPGA Systems
Compact IoT device PCB with wireless connectivity and low-power microcontroller
IoT  Devices
Wireless communication module PCB with integrated radio and antenna circuitry
Wireless Modules
Embedded camera board with image sensor and MIPI interface for vision systems
Cameras & Sensors
Carrier Boards
Microcontroller-based control board with power management and I/O interfaces
MCU Devices
Flexible flat cable and connector assembly for PCB interconnection
FFC and FPC cables
Each design is optimized for signal integrity, thermal stability, and cost-efficient manufacturability.
Have a concept or draft schematic?
Let’s turn it into a manufacturable design.
Let’s Build Your Next Electronics Design →

From Firmware to Complete Embedded Systems

Our engineers develop reliable embedded software for industrial, IoT, and AI-vision devices.
We handle the full software stack — from low-level drivers to user-level applications and optimization for production.
Microcontroller unit used for firmware development and real-time embedded control
Firmware for Microcontrollers
RTOS integration, interfaces such as I²C, SPI, UART, CAN, and USB.
FPGA chip used for hardware acceleration and embedded HDL development
FPGA and HDL logic
High-speed data processing and interface logic on FPGA platforms.
System-on-Chip representing high-performance embedded computing hardware for AI and vision applications
Embedded Linux
Development of BSP, bootloaders, Device Tree and kernel modules
Our experience covers systems running on Linux, RTOS, and custom bare-metal environments.
Let’s Build Your Next Embedded System →

Five Problems Our Clients Come to Us With

Real challenges that block progress in AI vision and embedded systems development projects
Embedded Linux boot failure during system bring-up and kernel initialization
The business grows faster than the engineering team
As products evolve, the complexity of electronics and systems increases faster than internal teams can scale.
Hiring experienced hardware and embedded software engineers is slow, expensive, or simply impossible, preventing companies from scaling and moving on to more complex, high-margin projects.
In such moments, companies need an external engineering capacity they can rely on immediately.
High cost of finished devices, need to reduce the cost of components
In many cases, the market price of components, such as carrier boards, sensor boards, and camera modules, is several times higher than the actual production cost.
This leads to increased production costs, reduced profits, and a decrease in the competitiveness of end devices.
This is where custom hardware design becomes a strategic advantage, not an expense.
The platforms available on the market do not meet the requirements
Off-the-shelf hardware and software often fail to meet the actual project requirements.
The required interfaces, performance, or software management are missing, limited, or not configurable.
As a result, teams are forced to make compromises that violate the system architecture or product vision.
We come to the rescue when existing solutions fail to meet project requirements.
Vendor technical support cannot resolve real engineering issues
In many cases, vendor technical support is limited to formal or standard responses and documented use cases.
When changes to custom drivers, low-level debugging, or hardware measurements are required, support is often unable to help. This can completely block development and halt the entire project.
In such cases, projects require direct access to engineers who can solve any issues.
Implementing projects requires a wide range of deep knowledge
Complex systems require collaboration between hardware design, firmware development, and system software.
Relying on individual freelancers is risky and difficult to manage, while outsourcing to engineering firms is often prohibitively expensive. This can lead to significant bottlenecks and high project implementation costs.
Companies are then looking for an engineering team that combines deep expertise with predictable costs.
In these situations, progress depends on direct access to engineers who work below the abstraction layer and take responsibility for the full system.
Discuss your technical challenge →

Turning Your Pain Into Measurable Results

Real examples of solved problems, cost reduction, and risk mitigation.
Successful embedded Linux system boot after debugging and configuration
Cost Optimization
Custom-designed carrier boards instead of expensive modules.

▪️ Market price: $250–350 per unit
▪️ Custom design cost: <$50 per unit
▪️ Diff: $250 - $50 = $200 per unit
▪️ Volume: 5,000 units per year
▪️ Calc: $200 * 5,000 pcs = $1,000,000
Total savings $1,000,000+ per year*
From MVP to Investment
The client had a good software product, but poorly designed hardware and firmware were hindering demonstrations and investor validation.

Result:
After stabilizing the MVP and resolving low-level technical issues, the startup was able to move on to investor demos.
Next funding round secured $500,000*
Time-to-Market Acceleration
Unblocking stalled projects

Problem: The phy interface chip is unstable.
SoC vendor support: 8 weeks, no solution found.
Vendor solution: Replace the chip, make changes to the PCB, no guarantee of results.
Our involvement: 10 days, debugging and Low-level driver
Working prototype provided, project unlocked*
Savings on hiring
Scaling without building an in-house team, workspace, and expensive lab equipment.

▪️ Hiring senior engineer: 3–6 months
▪️ Annual cost per engineer: $110,000-$150,000
▪️ Additional expenses: $50,000-$100,000

▪️ Our model: immediate start, predictable cost
Save 3-6 months and 1.5 - 2 times more money*
📌 *Based on real projects. Details available upon request.
For our clients, engineering is not an expense — it’s a lever for growth.
Review your project economics

Our Services

We provide end-to-end hardware and firmware development for AI vision and embedded systems,
specializing in NVIDIA Jetson, Rockchip, NXP, Sony, Omnivision and other platforms.
From custom PCB design to firmware, BSP, and enclosure engineering — we cover the entire product lifecycle.
View All Services →

How We Work

We start with a deep technical consultation to define your system architecture,
followed by full-cycle development — from schematics and enclosure design to firmware and software integration.

01

Consultation
Architecture planning, selection components, and interface definition for platforms

02

Development
Hardware design, PCB layout, enclosure, firmware, and BSP integration — full-cycle R&D

03

Support
Testing, optimization, and production readiness assistance

Get in touch with our engineers ->

Projects

We design and build advanced embedded systems, AI cameras, and custom electronics — from Jetson carrier boards and sensor modules to complete AI vision platforms.
View All Projects →
Advanced Equipment for Electronics Testing and PCB Development

Our state-of-the-art laboratory equipment

Our lab allows to rapidly prototype, debug, and validate complex embedded systems, ensuring reliability before production.

Measurement & Analysis:

High-frequency oscilloscopes and spectrum analyzers
Logic analyzers and signal generators
RLC meters, multimeters, precision power supplies

Assembly & Prototyping:

Soldering and reflow stations
Rework tools for prototype repair
3D printer and CNC machining
ATEH.tech in-house electronics laboratory with oscilloscopes, signal analyzers and soldering equipment
Engineer using oscilloscope for analog signal measurement
Analog Measurement
Professional soldering and reflow tools in ATEH.tech lab
Soldering 
Tools
Logic analyzer and digital signal measurement setup
Digital Measurement
High-precision RLC and power supply instruments
high-precision instruments

Engineering Capabilities & PCB Expertise

We design and prototype advanced printed circuit boards for embedded and AI vision systems.
Our expertise includes: high-speed, RF, power, and HDI multilayer PCBs, as well as manual prototyping and testing.
Work with all types IC package types: BGA, LGA, QFN, etc.
PCB types: HDI, Multilayer, High-Speed, Wireless, FFC, FPC cables, and Rigid-flex PCBs.
Production, bring-up, and testing of prototypes and samples.
Manual assembly of components for rapid prototyping, modification, and repair of PCB.
high-speed PCB design with PCIe, USB 3.1, HDMI, and MIPI interfaces

High-Speed Interfaces

PCI Express, NVMe, USB3, USB type-C, LVDS, SLVS, SLVC-EC, MIPI CSI, Ethernet, SATA, SFP, MIPI DSI, HDM
Multilayer PCB stackup design with blind and buried vias

Multilayer PCB

We have extensive experience in developing multilayer PCBs with blind, buried, and micro-vias.
Compact embedded electronics board with USB interface and Murata Wi-Fi module

Radio Interfaces

Wi-Fi, Bluetooth, NFC, Zigbee, GSM, GPRS, 2G, 3G, 4G, LTE, GNSS with Ceramic, and PCB antennas

High-Density PCB

HDI is designed to pack circuitry into a smaller space, allowing for increased circuit density
PCB power circuit with PoE and DC/DC converters

Power Supply

We use different types of power supplies:
PoE, PoE+, PoE++, AC/DC, DC/DC
PCB assembly with BGA, LGA, and QFN chip housings

BGA, LGA, QFN Cases

We develop circuits and printed circuit boards with any type IC package: BGA, LGA, QFN

Team Led message

Artem Sereevich
Since childhood, I’ve been passionate about electronics and programming — assembling various toys, circuits, and experimental devices. As I grew older, this passion evolved into a lifelong commitment to engineering, leading me to earn a degree in Electronics Engineering. Since then, I’ve continually expanded my knowledge and spent many years working in AI solutions, embedded systems, and product development.

Over the years, I’ve gained extensive expertise in electronics, firmware, and software. I truly enjoy designing and improving electronic devices — every stage of the process, from concept and design to production, brings me great satisfaction.

With over 20 years of experience in electronics and firmware development, I bring a deep technical foundation and creative problem-solving mindset to every project. Together with my team, we’ve successfully delivered over 40 commercial products, most of which are now in production.

We take pride not only in our engineering excellence but also in providing exceptional customer support, ensuring that every client enjoys a seamless and successful experience working with us.

Meet Team

Our team has a deep understanding of electronic and PCB design, EMI, Embedded Linux, drivers, FPGA, and firmware development.
True Stories

Why are so many teams like yours choosing us

Custom Carrier Board Case Study: Robotics Vision System

Problem
A robotics R&D company needed a reliable carrier board for NVIDIA Jetson Platform with multiple camera inputs and strict EMI constraints.

Solution
ATEH.tech developed a 8-layer, EMC-optimized carrier board supporting two MIPI CSI-2 cameras, Gigabit Ethernet, and NVMe. This design reduced interference and simplified integration.

Result
The new board cut prototyping time by 25 % and enabled the client to launch an autonomous vision system within schedule and budget.
"ATEH.tech delivered a board that perfectly matched our technical and production needs. Their fast support and documentation made integration smooth. We’re already planning our next Jetson-based platform with them."

Marcus D.
CTO, Robotics Division

Trusted by Clients Worldwide

Real projects. Real results. Verified reviews from Upwork. 
5.0 / 5
Average rating
11
Verified feedbacks
18
Completed projects
2,000+
Hours on Upwork
Excellent job. Perfect skills engineer! Detailed understanding of the project. Will hire him again! Strongly recommend!

Custom Embedded Hardware
Verified Upwork Client
Excellent professional team that will go out of his way to understand the job and complete it successfully. Very knowledgeable and always willing to learn and collaborate.
Linux BSP Development
Verified Upwork Client
Great service and great person. He knows what he is doing. Artem is real professional and well organized man! Strongly recommend!
PCB Design and Hardware Development
Verified Upwork Client
It was all 100% perfect, I definitely recommend to work with Artem! I enjoy working with such a professional!

AI Vision System
Verified Upwork Client
View Full Upwork Profile
See all reviews and completed projects on Upwork

Here are some questions we are often asked

If your question is not listed here, then please contact us.
Ask a question
What exactly does ATEH.tech do?
ATEH.tech is an engineering team specializing in AI vision and embedded systems development.
We design and build custom hardware and firmware solutions for intelligent devices — from early concept to production.
Our expertise includes embedded platforms, camera systems, image sensors, and edge AI technologies.
What types of solutions are available from ATEH.tech?
We provide a wide range of custom electronic and embedded solutions tailored to client needs.
Our services cover board design, prototyping, firmware development, sensor integration, and complete system design for vision, robotics, and IoT applications.
What is the process for developing a custom solution with ATEH.tech?
Our process begins with understanding the client’s technical and business goals.
We define system architecture, select components, design hardware and firmware, validate prototypes, and support manufacturing — ensuring smooth transition from prototype to mass production.
What are some examples of previous projects ATEH.tech has worked on?
ATEH.tech has developed a variety of intelligent systems, including AI cameras, embedded computing modules, machine vision devices, and industrial automation platforms.
Our experience spans across domains such as robotics, transportation, security, and research.
What is the expected turnaround time?
The turnaround time depends on the complexity and scope of the project.
However, our optimized design workflow enables us to deliver fast results without compromising quality.
Please contact us for a customized time estimate.
Does ATEH.tech provide ongoing support and maintenance?
Yes. We provide long-term technical support, firmware updates, and production assistance to ensure stable operation and product reliability throughout its lifecycle.
What makes ATEH.tech different from other engineering or PCB design companies?
ATEH.tech stands out for its deep expertise in AI Vision and Embedded Systems Engineering.
We combine electronics, optics, firmware, and AI to create complete intelligent solutions — not just hardware.
Our customer-focused approach, innovation, and engineering precision ensure exceptional results from concept to production.
Contact us today!

Are You Ready to accelerate R&D process?

Let’s discuss your project >>


© 2019-2026. ATEH.tech — Engineering Team
AI Vision Solutions &
Embedded Systems Engineering

★★★★★ 5.0 Upwork Rating | View Profile

All rights reserved.
All trademarks are the property of their respective owners.

Georgia, Tbilisi
+995 (591) 93-83-18
[email protected]
license